- New
- Out-of-Stock
Reinforced Plug & Play E40 Reflector - HydroParadise
- Write a review
€26.49
Tax included
Tired of reflectors that fail or don't hold up? At HydroParadise, we know what you're looking for: something sturdy, efficient, and above all, easy to install. This reinforced E40 reflector is the solution to boost your light output without any hassle. We designed it for demanding growers, those who want concrete results.
- Unrivaled Robustness — No more deformations! Its reinforced design effortlessly supports the heaviest bulbs, from TerraLED LEDs to HPS/MH up to 600W. A mistake to avoid: not checking your ballast's compatibility with the bulb, as this can damage your equipment.
- 'Plug & Play' Installation
, whether they are HPS, MH, hybrid, CFL lamps or even some specific LEDs like TerraLED. It can support powers ranging from 125W to 600W, making it an excellent reflector for a 600w bulb. The common mistake to avoid is neglecting the compatibility between your bulb and your ballast. Make sure the ballast precisely matches the wattage of your bulb to avoid overheating or malfunction. For optimal performance, especially with HPS or MH bulbs, consider good ventilation. If you are using a cool tube, a 125-150mm extractor is essential to dissipate heat and maintain a stable temperature in your grow space. Don't forget to use heat-resistant combi ducts for maximum safety.
Lighting optimization and error prevention
Optimizing grow light is crucial for the development of your plants. The positioning of your reinforced E40 reflector is paramount. Adjust the distance from the canopy according to the power of your bulb and the growth stage to avoid burns. A field tip: many forget to remove the protective film on the reflective surface. This film, although transparent, significantly reduces the efficiency of your reflector. Remember to remove it before first use! Regular maintenance, such as gentle cleaning of the reflective surface, will ensure maximum light reflection and increased light output in the long term. To go further in optimization, you can combine this reflector with a moving system like the Lightail V4 Original Intellidrive for even more homogeneous diffusion.
Detailed technical specifications
This reinforced E40 reflector is designed with materials for maximum durability. Its rigid structure is suitable for small grow spaces. While exact dimensions may vary slightly, expect a typical length of 30 to 50 cm. It usually comes pre-assembled, without a cable, giving you the freedom to choose the length and type of cable suitable for your setup. Some cool tube models integrate 4mm Pyrex glass, allowing for a thermal gain of 4 to 5°C, a significant advantage for heat management. It is an essential hydroponic growing accessory for any lighting system.
Community Reviews and Testimonials
The growing community is unanimous: the Plug & Play ease of this reinforced E40 reflector is a major asset. Feedback highlights its robustness, capable of supporting TerraLED LED bulbs or high-power HPS without problems. On specialized forums, a clear improvement in increased light output is observed. Some testimonials report an increase of nearly 50% in yield compared to basic reflectors, especially with models inspired by Adjust-A-Wings. Be careful, however, some similar cool tubes can be fragile to shocks, handle it with care during installation.
FAQ
How to install my reinforced E40 reflector?
Installation is simple: screw your E40 bulb into the socket, then connect the reflector to your ballast. Hang it at the desired height in your grow space. Don't forget to remove the protective film if present!
Is this reflector compatible with my 600W HPS bulb?
Yes, absolutely. This reinforced E40 reflector is designed to support powers up to 600W, including HPS and MH bulbs. Just make sure your ballast is also suitable for a 600W bulb.
How to optimize light output with this reflector?
For maximum grow light optimization, adjust the distance between the reflector and your plants, regularly clean the reflective surface, and ensure good ventilation in your space. Using a light baffle can also help direct light better.
Do I need to use a specific ballast with this reflector?
The reflector itself does not require a specific ballast, but the bulb you connect to it does. It is imperative to use a ballast whose power exactly matches that of your bulb (e.g., 400W ballast for a 400W bulb). This is a common mistake that can damage your equipment.
Conclusion
The reinforced E40 reflector from HydroParadise is much more than a simple accessory; it's an investment for increased light output and a more serene grow. Its robustness, Plug & Play ease of installation, and extended compatibility make it a choice for any grower concerned with optimizing their lighting. Don't wait any longer to transform your grow space and give your plants the light they deserve. For additional thermal insulation, consider Mylar thermal and reflective insulation.
CBL-REFL-RENF-E40
Data sheet
- Puissance (W)
- 125-1000W (compatible bulbs)
- Culot
- E40
- Accessoires inclus
- E40 socket
- Compatibilité
- HPS, MH, hybrid, CFL, LED TerraLED bulbs
- Type
- Réflecteur
- Structure
- Rigid
- period_of_use
- All year round for indoor cultivation (vegetative and flowering)
